2013 Yamaha FX Nytro MTX 162

$8,500.00


New/Used
New
Usage
1 Miles
Availability
In Stock
Location
Larson's Cycle Inc.
Primary Color
Yamaha Black / Charcoal
Title
Clean
Condition
Excellent
Year
2013
Manufacturer
Yamaha
Model
FX Nytro MTX 162

Overview

Dealer Insights

The "LONG" track MTX NEW AND PERFECT

A hardcore mountain rider's mountain sled. No springs attached!
A hardcore mountain rider's sled. No springs attached!

Handling
FXG2 front suspension geometry: The FX Nytro MTX 162 features the acclaimed FX Nytro front suspension with more trail and relaxed caster for greater deep snow handling and side hilling ability. The sway bar was also removed to enhance handling in steep, mountainous regions.
FX™ chassis with sport rider-forward position: The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro MTX 162 a very centralized mass. The FX Nytro MTX 162’s sport rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
NEW! Tall, wide, hooked mountain handlebars: The 2013 FX Nytro MTX 162 uses the same handlebar as the trail models, with less bend than the previous mountain setup. The center strap has a new billet clamp mounting and the strap itself stands taller over the center post. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.
Composite upper skeleton: The headlight assembly and upper portion of the Nytro MTX 162 is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.
Lightweight tunnel: The FX Nytro MTX 162 features a lightweight tunnel design. With the runningboards tipped up at an aggressive 11-degree angle, the FX Nytro MTX 162 delivers big ground clearance for deep snow capability. The design also features large snow evacuation and boot gripper punch outs.
Comfort
ProMountain® Air rear suspension: The Nytro MTX 162 is equipped with a totally redesigned rear suspension. In a joint effort, Yamaha co-developed this suspension with Fox to make it the best suspension for any mountain rider. It is equipped with a Fox® Float™ 2 and Fox® Float™ XV shock that boost this suspension to a whole another level. This combined with a new shallow approach angle, a semi coupled design, and new lightweight rails, make this one suspension you don’t want to mess with.
Fox® FLOAT™ 2 front shocks: Fox® FLOAT™ 2 shocks use an air spring designed to force the piston to rebound. This eliminates the need for steel coil springs. They cut three pounds off the sled’s overall weight, as compared to traditional coil over springs. They are individually tunable by using a pocket-sized air pump, which comes with the sled, so consumers will be able to set the front suspension up to their liking.
Wide runningboards with traction: The FX Nytro MTX 162 is all about fun and handling. As a result, the runningboards are nice and wide and loaded with traction. Riders will be able to put their feet anywhere on the runningboards and have confidence in their traction. This allows the rider to move around and really enjoy the full fun of a lightweight sled.
Wheels with removable bearings: Replaceable bearing wheels makes maintenance easy and cheap, while the 6 spoke design adds to the visual appeal of the already super cool looking Nytro MTX 162. This design is implemented on all rear wheels.
Sculpted narrow seat: The FX Nytro MTX 162 has a narrow seat for added comfort. In addition to putting the rider in a tall, forward, attack posture, the seat’s height makes it plush and comfortable for a full day of riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
NEW! Dual controls for Concentrated hand warmers: The FX Nytro MTX 162 has new dual controls to let you adjust the warmer levels for your hands on the left side and the thumb on your right. These hand warmers have a concentrated element design, which focuses the heat in the middle of the grip material. The result is a warm grip for your hand’s most comfortable riding position. In addition, an insulator is placed between the heating element and handlebar to retain heat longer and more efficiently than previous designs.
Standard electric start: Yamaha’s electric starter system allows consumers to fire up their Nytro MTX 162 with the turn of a key. There is no pulling on a nylon cord to get this high-tech engine growling! Electric start is a standard feature on all of Yamaha’s 4-stroke machines.
Digital gauge: The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout. In addition, the rider can select tachometer, odometer or tripmeter data to appear on secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
Standard mechanical reverse: The Nytro MTX 162’s simple reverse system allows riders to back out of tight spaces hassle-free. It’s engaged with the lever located on the right shroud. Just pull out the lever and slide it to the right for quick and easy use.
Quick-release, single-piece hood/console shroud: The FX Nytro MTX 162 has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus® quick-connect fasteners.
New graphic packages: The FX Nytro MTX 162 comes in two graphic packages; Yamaha Blue as well as black/charcoal. These awesome designs produce one of the best looking sleds on the snow.
Engine
Type / Displacement / cc: 4-Stroke, 1049cc
Cylinders: Three
Cooling: Liquid
Bore & Stroke / mm: 82.0 x 66.2
Intake Design: 2 Valves
Ignition: Digital T.C.I. with throttle position sensor
Fuel Delivery: 3 x 41mm fuel injection
Exhaust: 2 valves, rear exhaust
Clutch / Transmission: YVXC, variable ratio
Disc. Brake Type: 4-piston hydraulic w/ lightweight ventilated disc
Chassis
Front Suspension: FXG2 w/o sway bar
Front Shocks: Fox® FLOAT® 2
Front Travel / in.: 8.5 in
Ski Type: MT-9 mountain ski
Carbide Ski Runners: Standard
Rear Suspension: ProMountain® Air 162
Rear Shocks: Fox® FLOAT® 2/ FLOAT® 2 XV
Rear Travel / in.: 15.0 in
Track Type: Single-ply Camoplast® Ascent™
Dimensions
Overall Length / in.: 131.5 in
Overall Height / in.: 47.0 in
Track/Width x Length x Height / in.: 15 in X 162 in X 2.25 in
Ski Stance (ctr. to ctr.) in.: 39.7 in
Fuel Capacity / Gal.: 7.3 gal
Fuel Type: Regular Unleaded
Oil Capacity / Qts.: 3, Dry Sump
Engine Oil Type: Yamalube 4, 0w-30, Cold Weather Formula
Features
Electric Start: Standard
Reverse: Standard
Hand & Thumb Warmers: Standard
Windshield Height: Low
Mirrors: Optional
Seating Capacity: One
Tunnel Protectors: Standard
Headlight Watts, Type: 60/55W Halogen x 2
High Beam Indicator: Standard
Oil & Temp Light: Standard
Fuel Gauge Type: Electric (LCD), low fuel warning light
Speedometer: Standard (LCD, digital)
Odometer: Standard (large LCD display)
Tripmeter: Standard, backlit (LCD)
Tachometer: Standard, backlit (LCD)
DC Outlet: Automotive
Warranty: 1 Year (Limited Factory Warranty)
Performance
High Performance 4-stroke engine: The over-achieving High Performance engine is the heart of our lightweight, high performance and aggressive FX Nytro model family. It dominated its class at the American Snowmobiler Shoot-Out in New York for 3 years straight, claiming top speed and posting the best average ET over 4 runs down the ¼-mile track.
Advanced fuel injection: The High Performance engine uses Yamaha’s advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engine’s spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
Engine braking reduction system: The High Performance engine features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a “coast” feeling.
Lightweight rear-exiting exhaust: The patented rear exit design serves many performance-enhancing functions on the FX Nytro MTX 162. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
Forced air radiator ducting: The FX Nytro MTX 162’s airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
15 x 162 x 2.25-inch Single-ply Ascent™ track: The Ascent mountain track was designed to get on plane quicker in powder and be durable enough to handle the high horsepower of a boosted sled. This was achieved by strengthening the bottom 2/3 of the lug for acceleration, while leaving the top 1/3 elastic to be able to curve and provide lift. The 15x162x2.25-inch track features a 3-inch pitch to allow more snow to pack in between the lugs for a firmer grip on the snow.
Single-piece extrovert drive sprockets: Churning the track is a pair of new single-piece extrovert drive sprockets. The engineering teams purpose-built these sprockets to work with the Ascent™ track, reduce weight from the previous sprockets, and decrease vibration.

Description

A hardcore mountain rider's sled. No springs attached!

Handling
  • FXG2 front suspension geometry: The FX Nytro MTX 162 features the acclaimed FX Nytro front suspension with more trail and relaxed caster for greater deep snow handling and side hilling ability. The sway bar was also removed to enhance handling in steep, mountainous regions.
  • FX™ chassis with sport rider-forward position: The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro MTX 162 a very centralized mass. The FX Nytro MTX 162’s sport rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
  • NEW! Tall, wide, hooked mountain handlebars: The 2013 FX Nytro MTX 162 uses the same handlebar as the trail models, with less bend than the previous mountain setup. The center strap has a new billet clamp mounting and the strap itself stands taller over the center post. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.
  • Composite upper skeleton: The headlight assembly and upper portion of the Nytro MTX 162 is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.
  • Lightweight tunnel: The FX Nytro MTX 162 features a lightweight tunnel design. With the runningboards tipped up at an aggressive 11-degree angle, the FX Nytro MTX 162 delivers big ground clearance for deep snow capability. The design also features large snow evacuation and boot gripper punch outs.
Comfort
  • ProMountain® Air rear suspension: The Nytro MTX 162 is equipped with a totally redesigned rear suspension. In a joint effort, Yamaha co-developed this suspension with Fox to make it the best suspension for any mountain rider. It is equipped with a Fox® Float™ 2 and Fox® Float™ XV shock that boost this suspension to a whole another level. This combined with a new shallow approach angle, a semi coupled design, and new lightweight rails, make this one suspension you don’t want to mess with.
  • Fox® FLOAT™ 2 front shocks: Fox® FLOAT™ 2 shocks use an air spring designed to force the piston to rebound. This eliminates the need for steel coil springs. They cut three pounds off the sled’s overall weight, as compared to traditional coil over springs. They are individually tunable by using a pocket-sized air pump, which comes with the sled, so consumers will be able to set the front suspension up to their liking.
  • Wide runningboards with traction: The FX Nytro MTX 162 is all about fun and handling. As a result, the runningboards are nice and wide and loaded with traction. Riders will be able to put their feet anywhere on the runningboards and have confidence in their traction. This allows the rider to move around and really enjoy the full fun of a lightweight sled.
  • Wheels with removable bearings: Replaceable bearing wheels makes maintenance easy and cheap, while the 6 spoke design adds to the visual appeal of the already super cool looking Nytro MTX 162. This design is implemented on all rear wheels.
  • Sculpted narrow seat: The FX Nytro MTX 162 has a narrow seat for added comfort. In addition to putting the rider in a tall, forward, attack posture, the seat’s height makes it plush and comfortable for a full day of riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
  • NEW! Dual controls for Concentrated hand warmers: The FX Nytro MTX 162 has new dual controls to let you adjust the warmer levels for your hands on the left side and the thumb on your right. These hand warmers have a concentrated element design, which focuses the heat in the middle of the grip material. The result is a warm grip for your hand’s most comfortable riding position. In addition, an insulator is placed between the heating element and handlebar to retain heat longer and more efficiently than previous designs.
  • Standard electric start: Yamaha’s electric starter system allows consumers to fire up their Nytro MTX 162 with the turn of a key. There is no pulling on a nylon cord to get this high-tech engine growling! Electric start is a standard feature on all of Yamaha’s 4-stroke machines.
  • Digital gauge: The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout. In addition, the rider can select tachometer, odometer or tripmeter data to appear on secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
  • Standard mechanical reverse: The Nytro MTX 162’s simple reverse system allows riders to back out of tight spaces hassle-free. It’s engaged with the lever located on the right shroud. Just pull out the lever and slide it to the right for quick and easy use.
  • Quick-release, single-piece hood/console shroud: The FX Nytro MTX 162 has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus® quick-connect fasteners.
  • New graphic packages: The FX Nytro MTX 162 comes in two graphic packages; Yamaha Blue as well as black/charcoal. These awesome designs produce one of the best looking sleds on the snow.
Engine
  • Type / Displacement / cc: 4-Stroke, 1049cc
  • Cylinders: Three
  • Cooling: Liquid
  • Bore & Stroke / mm: 82.0 x 66.2
  • Intake Design: 2 Valves
  • Ignition: Digital T.C.I. with throttle position sensor
  • Fuel Delivery: 3 x 41mm fuel injection
  • Exhaust: 2 valves, rear exhaust
  • Clutch / Transmission: YVXC, variable ratio
  • Disc. Brake Type: 4-piston hydraulic w/ lightweight ventilated disc
Chassis
  • Front Suspension: FXG2 w/o sway bar
  • Front Shocks: Fox® FLOAT® 2
  • Front Travel / in.: 8.5 in
  • Ski Type: MT-9 mountain ski
  • Carbide Ski Runners: Standard
  • Rear Suspension: ProMountain® Air 162
  • Rear Shocks: Fox® FLOAT® 2/ FLOAT® 2 XV
  • Rear Travel / in.: 15.0 in
  • Track Type: Single-ply Camoplast® Ascent™
Dimensions
  • Overall Length / in.: 131.5 in
  • Overall Height / in.: 47.0 in
  • Track/Width x Length x Height / in.: 15 in X 162 in X 2.25 in
  • Ski Stance (ctr. to ctr.) in.: 39.7 in
  • Fuel Capacity / Gal.: 7.3 gal
  • Fuel Type: Regular Unleaded
  • Oil Capacity / Qts.: 3, Dry Sump
  • Engine Oil Type: Yamalube 4, 0w-30, Cold Weather Formula
Features
  • Electric Start: Standard
  • Reverse: Standard
  • Hand & Thumb Warmers: Standard
  • Windshield Height: Low
  • Mirrors: Optional
  • Seating Capacity: One
  • Tunnel Protectors: Standard
  • Headlight Watts, Type: 60/55W Halogen x 2
  • High Beam Indicator: Standard
  • Oil & Temp Light: Standard
  • Fuel Gauge Type: Electric (LCD), low fuel warning light
  • Speedometer: Standard (LCD, digital)
  • Odometer: Standard (large LCD display)
  • Tripmeter: Standard, backlit (LCD)
  • Tachometer: Standard, backlit (LCD)
  • DC Outlet: Automotive
  • Warranty: 1 Year (Limited Factory Warranty)
Performance
  • High Performance 4-stroke engine: The over-achieving High Performance engine is the heart of our lightweight, high performance and aggressive FX Nytro model family. It dominated its class at the American Snowmobiler Shoot-Out in New York for 3 years straight, claiming top speed and posting the best average ET over 4 runs down the ¼-mile track.
  • Advanced fuel injection: The High Performance engine uses Yamaha’s advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engine’s spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
  • Engine braking reduction system: The High Performance engine features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a “coast” feeling.
  • Lightweight rear-exiting exhaust: The patented rear exit design serves many performance-enhancing functions on the FX Nytro MTX 162. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
  • Forced air radiator ducting: The FX Nytro MTX 162’s airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
  • 15 x 162 x 2.25-inch Single-ply Ascent™ track: The Ascent mountain track was designed to get on plane quicker in powder and be durable enough to handle the high horsepower of a boosted sled. This was achieved by strengthening the bottom 2/3 of the lug for acceleration, while leaving the top 1/3 elastic to be able to curve and provide lift. The 15x162x2.25-inch track features a 3-inch pitch to allow more snow to pack in between the lugs for a firmer grip on the snow.
  • Single-piece extrovert drive sprockets: Churning the track is a pair of new single-piece extrovert drive sprockets. The engineering teams purpose-built these sprockets to work with the Ascent™ track, reduce weight from the previous sprockets, and decrease vibration.

Specs

Engine

Engine Type
Four-stroke
Displacement
1049 cc
Bore x Stroke
82.0 x 66.2 mm
Cylinders
3
Engine Cooling
Liquid
Carburetion
3 x 41mm fuel injection
Ignition
Digital T.C.I. with throttle position sensor
Exhaust
2 valves, rear exhaust

Drivetrain

Brake Type
4-piston hydraulic w/ lightweight ventilated disc
Drive Clutch
YVXC, variable ratio

Suspension

Front Suspension
FXG2 w/o sway bar
Front Travel
8.5 in.
Rear Suspension
ProMountain® Air 162
Rear Travel
15.0 in.
Ski Type
MT-9 mountain ski
Ski Stance
39.7 in.
Track Type
Single-ply Camoplast® Ascent™
Track Dimensions
15 in. x 162 in. x 2.25 in.

General

Speedometer
Standard: LCD digital
Tachometer
Standard: Backlit LCD
Odometer
Standard: Large LCD display
Headlight
60/55W Halogen x 2
Fuel Capacity
7.3 gal.
Windshield
Low
Color
Yamaha Blue & White, Yamaha Black & Charcoal
Warranty
1 Year (Limited Factory Warranty)

Options

Electric Start
Standard
Hand & Thumb Warmers
Standard
Reverse
Standard
Mirrors
Optional

Promotions